Hydro Tek Ramteq Sioux      




Electric/Diesel

HG Series

HD Series

HP Series

HX Series

Electric/Natural Gas

HN Series

HN ProLine

 

 

 

 

 


Hydro Tek Hot Water Pressure Washers
Combine the cleaning power of high pressure, the grease-cutting effectiveness of hot water and the rugged durable contruction that comes with every Hydro Tek pressure washer and you have the best ingredients for long-lasting cleaning equipment in the industry.

The stainless steel construction offers a lifetime of corrosion resistance while providing years of effective cleaning.

Browse our vast selection of Hydro Tek pressure washers here and we're sure you'll find the solution to all of your cleaning needs.
Portable Electric-Diesel Fired

 

HG Series

High Intensity Diesel Burners & Super Efficient Heating Coils:

The ultimate balance of power and efficiency in these uniquely designed schedule 80 coils. Provides economical operation with consistent superior performance. Auto ignition adds peace of mind & ease of operation.

Stainless Steel Coil Housing & SS Inner Wrap:
Lifetime corrosion resistance, inside and out – unmatched coil protection, double wall protected to contain the intense heat of the burner providing optimal long life and performance.

Stainless Steel Frames and Panels:
Not just decorative flashes, these rugged and durable panels offer lifetime corrosion resistance and protection of your valuable investment from the harshest environments. Quick connects provide easy removal for full access to all major components and the Ultimate in serviceability.

Other Standard Features:
Adjustable pressure unloader, safety relief valve, burst disc technology and temperature limit switch. Nozzles for various applications, 50’ hose, gun and wand included. Heavy duty industrial motor with standard thermal overload protection. NEMA4-Water tight control panel with lighted switches.

Model HG30004E2M (2900 PSI; 3.5 GPM; 200°; 6.5 HP, 230V/1 PH) » Model Brochure
Model HG22004E2M (2200 PSI; 3.5 GPM; 200°; 5 HP, 208/230V/1 PH) » Model Brochure
Model HG15015E1M (1500 PSI, 1.5 GPM; 200°; 1.5 HP,115V/1PH 15A) » Model Brochure
Model HG15002E1M (1500 PSI; 2 GPM; 2 HP; 200°; 115V / 1 PH 20A) » Model Brochure
Model HG15015E1H (1500 PSI, 1.5 GPM, 1.5; 200°; HP,115V/1PH 15A) » Model Brochure
Model HG15002E1C (1500 PSI; 2 GPM; 2 HP; 200°; 115V / 1 PH 20A) » Model Brochure
Model HG22004E2C (2200 PSI; 3.5 GPM; 200°; 5 HP, 208/230V/1 PH) » Model Brochure
Back to Top

HD Series

Inlet Chemical Injection:

Inlet soap injection with precision chemical metering valve and float tank injects soap at full pressure for optimal cleaning effectiveness. Panel mounted controls enable the operator to vary the mixture of soap or other additives with ease.

Belt Driven Pump:
High torque, low RPM drive- cooler, quieter, continuous duty performance. These ceramic plunger triplex pumps feature oversized aluminum crankcases with special cooling fins for extended pump life and stainless steel valves, seats, springs and plunger rods for positive seating and increased performance.

7.5 Gal Fuel Tank with Filtration and Adjustable Temperature:
Heavy Duty“roto-molded” rust free fuel tanks with water separating fuel filter to protect against contaminated fuel. Extended run time reduces interruptions. Panel mounted adjustable temperature knob with steam setting increases cleaning effectiveness.

Model HD10003E1H (1000 PSI; 2.8 GPM; 250°; 6.5 HP, 115V/1 PH 20A) » Model Brochure
Model HD20004E2H (2000 PSI; 3.5 GPM; 250°; 5 HP, 208/230V/1 PH) » Model Brochure
Model HD25004E2H (2500 PSI, 3.6 GPM; 250°; 6.5 HP, 230V/1PH) » Model Brochure
Model HD25004E2C (2500 PSI; 3.6GPM; 250°; 6.5 HP, 230V / 1 PH) » Model Brochure
Model HD30003E2H (3000 PSI, 3 GPM; 250°; 6.5 HP, 230V/1PH) » Model Brochure
Back to Top

HP Series

The portable HP Series pressure washer delivers a balance of pressure, water flow and heat required for the fastest cleaning. A side-by-side demonstration will show that cleaning performance is determined more by water, heat and flow than just pressure. The HP pressure washer has the high capacity burner to accommodate high water flow and achieves a higher temperature rise than other washers and save valuable time and effort. To save you even more time, it features auto on/off, remote downstream soap control and adjustable pressure, giving the operator control at the spray gun and saving pump components and wear. It even has full pressure steam setting to clean faster on heavy equipment, greasy floors, dirty walls, oily steel or any grime-ridden surface.

High Heat / High Flow System:
The ultimate balance of heat and flow increases your cleaning power providing a consistent superior performance. Uniquely designed with Hydro Tek schedule 80 coils and Auto ignition for peace of mind & ease of operation. High capacity diesel burner with higher temperature rise for faster cleaning.

Stainless Steel Coil Housing and Inner Wrap:
Lifetime corrosion resistance, inside and out - unmatched coil protection, double wall protected to contain the intense heat from the burner providing optimal long life and performance.

Auto Start and Time Delay Shutdown:
Operator has total control over the system from the trigger gun. This added convenience not only saves time and effort, it reduces wear of the pump and produces an energy efficient system that outperforms the traditional manual on/off.

All Stainless Steel Frames and Panels:
Not just decorative flashes, these rugged and durable panels offer lifetime corrosion resistance and protection of your valuable investment from the harshest environments. Keeps your machine looking like new for years to come. Quick connects provide easy removal for full access to all major components and the Ultimate in serviceability.

Adjustable Temperature with Steam Setting:
Front mounted controls allows quick and easy adjustments of temperature and steam settings with higher heat than comparable washers for your toughest cleaning applications.

NEMA4 – Water Tight Control Panel:
ETL certified to UL1776 Class 2, for use in wash-down area, exceeding Industry standards. Special Hydro Tek control box features easy to use controls and provides instant access to electronics.

CAT Direct Drive Pump:
These Industrial triplex pumps feature extra service factor to outperform the competition in longevity. Featuring concentrically bored & polished, graphite impregnated ceramic plungers with advanced seal design to meet our Ultimate standard, yours.

7.5 Diesel Tank with filtration:
Heavy Duty “roto-molded” rust free fuel tank with water separating fuel filter to protect against contaminated fuel. Extended run time (up to 5 hrs) eliminates interruptions.

3.5 Gallon Soap Tank:
Chemical tank holds up to 3.5 gallons of soap for added convenience. (Only on HP21004 and HP28004)

Model HP20005E2 (2000 PSI; 4.2 GPM; 250°; 6.5 HP, 208V/230V/1 PH) » Model Brochure
Model HP21004E2 (2100 PSI; 3.5 GPM; 250°; 5 HP, 208/230V/1 PH) » Model Brochure
Model HP22005E2 (2200 PSI, 4.2 GPM; 250°; 6.5 HP, 230V/1PH) » Model Brochure
Model HP28004E2 (2800 PSI; 3.5GPM; 250°; 6.5 HP, 230V / 1 PH) » Model Brochure
Back to Top

HX Series

The HX Series pressure washer combines high pressure, hot water with exceptional heat rise for the ultimate performance in diesel fired cleaning machines. The half million BTU capacity burner provides superior heating capability even from the coldest water supply, increasing your cleaning speed and performance. the machine and burner start and stop instantly when the trigger gun is pulled or released, saving valuable time and water. The temperature can also be adjusted to steam with out any reduction to the water output flow for aggressive cleaning applications. The stainless steel panels and dependable auto start design give years of trouble free service even if used everyday. An invaluable piece of equipment preferred by institutions, facilities, restaurant and maintenance yards. Use it any where electrical power is available or preferred for grease and grime clean up.

Instant Trigger Start (ITS):
Operator has total control over the system from the trigger gun. The machine and burner starts and stops instantly when the trigger gun is pulled or released. Our unique flow control system eliminates false starts and outperforms traditional manual on/off systems. The pressure can also be controlled from the wand increasing operator efficiency.

Adjustable Temperature and Soap Settings:
Front mounted control panel allows quick and easy adjustments of soap and temperature settings.

Pressure Regulator:
A pressure regulator is used instead of the traditional unloader, creating a smooth flow during start-up and unmatched system reliability. This system also bleeds off the excess pressure increasing operator safety.

Rugged “Pro-Tect-It” Frame:
The Ultimate in protection. Hydro Tek’s unique “Pro-tect-it” frame of 1 ¼”, heavy gauge steel, with durable electrostatically applied powder coat finish. The built-in lifting eyes gives you greater flexibility and protection when moving the system.

Stainless Steel Panels:
Not just decorative flashes, these rugged and durable panels offer lifetime corrosion resistance and protection of your valuable investment from the harshest environments. Keeps your machine looking like new for years to come. Quick connects provide easy removal for full access to all major components and the Ultimate in serviceability.

NEMA4- Water Tight Control Panel:
ETL certified to UL1776 Class 2, for use in wash-down areas, exceeding Industry standards. Special Hydro Tek control box features easy to use controls and provides instant access to electronics. Standard diagnostic indicators, including an hour meter to monitor system use, ensures optimal system performance.

High Output Burners & Super Efficient Heating Coils:
Produces the highest heat rise in its class even with the coldest water supply, delivering optimal heating with over 500,000 BTU’s to increase your cleaning speed. The HX will also provide steam at full output flow with it’s exceptional heating ability for your toughest cleaning applications.

CAT Belt Driven Pump:
High torque, low RPM drive- cooler, quieter, continuous duty performance. These Industrial triplex pumps outperform the competition in longevity – featuring concentrically bored & polished, graphite impregnated ceramic plungers with advanced seal design to meet our Ultimate standard- yours.

7.5 Gallon Diesel Tank with filtration:
Heavy Duty “roto-molded” rust free fuel tanks with water separating fuel filter to protect against contaminated fuel. Extended run time (up to 5 hrs.) eliminates interruptions

Model HX21004E2 (2100 PSI; 4 GPM; 250°; 6.5 HP, 230V/1 PH) » Model Brochure
Model HX21004E3 (2100 PSI; 4 GPM; 250°; 6 HP, 230V/1 PH) » Model Brochure
Model HX21004E4 (2100 PSI, 4 GPM; 250°; 6 HP,460V/3PH) » Model Brochure
Model HX32004E2 (3200 PSI; 3.5GPM; 250°; 7.5 HP; 235V / 1 PH) » Model Brochure
Model HX35005E3 (3500 PSI, 4.5 GPM,; 250°; 10 HP,208/230V/3PH) » Model Brochure
Model HX35005E4 (3500 PSI; 4.5 GPM; ; 250°; 10 HP 460V / 3 PH) » Model Brochure
Back to Top
Stationary Electric/Natural Gas

HN Series

Is your cleaning system ready to work anytime you are? With the HN series, there is no need to light a pilot, refill the fuel tank, or hunt down a water hose. Simply set the switch to hot or cold and start cleaning. The low speed belt driven pump system is built for reliability. It also features a float tank and full pressure soap injection. The auto ignition burner runs on natural gas or optional liquid propane to help keep the air clean. The stationary design and high output is ideal for in-plant cleaning, industrial applications, and equipment repair cleaning at a price that is less than you might expect.

HN Ultimate Series Features

Remote Control with Hose, Nozzle, Wand Rack:
Safe, 24 volt remote with full pressure soap output and 100’ cord gives the operator control of all functions both at the machine and the remote wash site. Additional wash station remotes can be added.

Automatic Shutdown:
Adjustable automatic shutdown prolongs pump life and provides worry-free operation.

CAT Belt Driven pump:
Low RPM drive – cooler, quieter, continuous duty performance. These industrial triplex pumps feature concentrically bored and polished, graphite impregnated ceramic plungers with advanced seal design.

Ready to Work when you are:
No need to fill fuel tanks or hunt down a water supply when machine is directly plumbed into natural gas and water lines. The pressure washer can be housed indoors, away from the elements, while locating the wash station remote outdoors.

More Standard Features:
• Detergent flow metering at full pressure
• Quick release nozzles
• Heavy duty industrial motor with standard thermal overload protection
• Adjustable temperature up to 2500 F with steam setting
• Burst disc technology for operator safety
• Rustproof float tank to regulate incoming water ensuring consistent system performance
• Heavy duty hose 50’ 5000 PSI/ 2500 rated and stainless steel
• “Ultra Gun” with adjustable pressure


Model HN20004E2R (2000 PSI; 3.8 GPM; 250°; 5 HP, 230V/1 PH) » Model Brochure
Model HN20004E8R (2000 PSI; 4.2 GPM; 250°; 5 HP, 208V/1 PH) » Model Brochure
Model HN22005E2R (2200 PSI; 4.2 GPM; 250°; 6.5 HP, 230V/1 PH) » Model Brochure
Model HN21004E3R (2100 PSI; 4 GPM; 250°; 6 HP, 230V/3 PH) » Model Brochure
Model HN21004E4R (2100 PSI; 4 GPM; 250°; 6 HP, 460V/3 PH) » Model Brochure
Model HN32004E2R (3200 PSI; 3.5 GPM; 250°; 7.5 HP, 230V/1 PH) » Model Brochure
Model HN35005E3R (3500 PSI; 4.3 GPM; 250°; 10 HP, 230V/3 PH) » Model Brochure
Model HN35005E8R (3500 PSI; 4.3 GPM; 250°; 10 HP, 200/208V/3 PH) » Model Brochure
Model HN35005E4R (3500 PSI; 4.3 GPM; 250°; 10 HP, 460V/3 PH) » Model Brochure
Back to Top

HN Proline™ Series Features

Bypass Cool System:
Pump cooling system prevents pump from overheating in bypass for worry free operation. (Remote wash station and pressure gage not included on HN Proline™)

Optional Features and Accessories:
Stainless steel hose reel with lifetime corrosion resistance
• Additional wash station remotes
• Draft diverter
Stainless burner cover
• LP conversion
• Turbo Nozzles
• Hydro Twister- deck and concrete cleaner
• Wet sandblast assembly
• Hose and wand extensions

Model HN20004E2C (2000 PSI; 3.8 GPM; 250°; 5 HP, 230V/1 PH) » Model Brochure
Model HN20004E8C (2000 PSI; 3.8 GPM; 250°; 5 HP, 208V/1 PH) » Model Brochure
Model HN20005E2H (2000 PSI; 4.8 GPM; 250°; 6.5 HP, 230V/1 PH) » Model Brochure
Model HN30005E3H (3000 PSI; 4.8 GPM; 250°; 10 HP, 230V/3 PH) » Model Brochure
Model HN30005E8H (3000 PSI; 4.8 GPM; 250°; 10 HP, 208/230V/3 PH) » Model Brochure
Model HN30005E4H (3000 PSI; 4.8 GPM; 250°; 10 HP, 460V/3 PH) » Model Brochure
Model HN30008E3H (3000 PSI; 7.4 GPM; 200°; 15 HP, 230V/3 PH) » Model Brochure
Model HN30008E8H (3000 PSI; 7.4 GPM; 200°; 15 HP, 208V/3 PH) » Model Brochure
Model HN30008E4H (3000 PSI; 7.4 GPM; 200°; 15 HP, 460V/3 PH) » Model Brochure
Back to Top